Z15X silk mouth soft sealing gate structure of the characteristics of the pneumatic valve

ZX silk mouth soft sealing gate pneumatic valve using synthetic rubber deformation compensation effect overall package to achieve good sealing effect, overcomes the general brake pneumatic valve sealing, leakage and rusty phenomenon, bottom part using the same flat as the pipe pneumatic seat design, do not produce sundry sedimentation, small flow resistance coefficient, smooth channels. Pneumatic valve body internal and external use avirulent epoxy resin coating to prevent corrosion and rust, not only available for domestic water, can also be used in sewage water treatment system. Widely used in tap water, sewage, construction, petroleum chemical industry, food, medicine, light textile, electric power, ships, metallurgy energy systems such as fluid pipe used as adjustment and throttling device.
ZX silk and the structure characteristics of pneumatic valve mouth soft sealing gate
, flat type pneumatic pneumatic valve seat traditional gate often wash the tube in the water after the external, such as stone, wood, cement, paper scraps, sundries such as silt on the bottom of the pneumatic valve inside the groove, easy to cause cannot close tightly and form slack phenomenon, soft seal lock at the bottom of the pneumatic valve is the same as the pipe of the flat design, not easy to cause debris deposition, make the fluid unimpeded.
, the overall package of pneumatic valve is made of high quality rubber for overall, outsourcing, the domestic first-class rubber vulcanization technology make the pneumatic valve to ensure accurate after vulcanization of geometry size, and pneumatic valve and then secure, rubber and ductile cast iron is not easy to fall off and elastic memory preferred.
and corrosion pneumatic valve adopts powder epoxy resin coating, can prevent the corrosion and rust of pneumatic valve body. And can be used in the sewage system. Not easy to fracture in the past the traditional casting anchorman pneumatic valve is often caused by external things hit, collision or overlapping phenomenon such as fracture. Due to the ontology to nodular cast iron, this kind of situation has been greatly reduced. Type three 'O'
,
the pneumatic valve stem with three type 'O' ring seal design. Can reduce the frictional resistance when switch, sharply reduce leakage phenomenon and can not replace the sealing ring of water construction.
and help
the pneumatic valve body internal non-toxic epoxy resin coating, pneumatic valve with both internal and external surface of the rubber coated completely without water rust or corrosion phenomenon, to drink.
and the pneumatic valve pneumatic valve USES the precision of the precision casting, precision pneumatic valve body geometry size makes north to ensure pneumatic valve without the need for any finish sealing.
and light weight
body is made of ductile casting, which weight than traditional brake pneumatic valve is about twenty percent to thirty percent reduction in weight, convenient and easy maintenance.