To prevent the jinan heavy cylinder pad broken to pieces by burning method

Engine cylinder gasket components were often in high temperature and high pressure and work under the condition of high speed relative motion, therefore, cylinder pad and relevant spare parts is easy to burn and produce faster mechanical wear. In order to make the engine work often in good technical condition, prolong its service life, it is necessary to carry on the reasonable use, maintenance, right when found fault symptoms, to quickly find out the cause of the malfunction, developed after the solution will be ruled out fault. A, before installation should strictly check the cylinder head and engine block two joint warping degrees below. B, check the cylinder liner on the face on the engine body plane projection is high enough, uniform. C, check whether the quality of the cylinder gasket qualified. D, the installation process, screw down the bolt and nut, according to the requirement and reach the specified torque. E, after the switch to a new cylinder pad, after the engine working ~ h, should be in accordance with the order and checked and tighten the cylinder head bolt and nut torque. After every work ~ h engine, should check a tightness of cylinder head bolt and nut, loose when tightened in a timely manner. F, before installation on the both sides of the cylinder gasket besmear brushs special graphite cream, the coating thickness. ~。 Mm between, in order to increase the rigor of joint, at the same time for the next disassembly of cylinder head and cylinder pad. Both sides of the cylinder pad with a thin layer of butter can also increase the rigor after installation, but unfavorable after a long time to work, otherwise it will cause the cylinder pad with tight adhesion between faying surface, remove easily damaged. G, often occur in cylinder pad damage parts even a thin layer of asbestos pad line or add a suitable thickness is less than or equal to the shape. Mm sheet copper pad, the part of the joint more closely, to prevent the cylinder pad damage.