Tip electropneumatic valve repair method

Electric pneumatic valve is widely used in the production of the work of a pneumatic valve. Here to say electropneumatic valve in the maintenance of a few tricks.


electropneumatic valve pneumatic valve body to assembly to tighten bolts must be symmetrical, gradually and evenly. Only removable pressure before and after pneumatic valve, pneumatic valve for dismantling operations. The new parts also need to be cleaned before assembly. Assembly time should not be allowed to have metal chips, fiber, fat ( With the provisions of the exception) Dust and other impurities, foreign bodies, such as pollution, adhesion, or stay on the parts surface or into the lumen.

after wash wall cleaning agent to volatilize and after cleaning, Available not soak cleaner silk cloth to wipe) Are assembled, but shall not be shelved for a long time, or it will rust and dust pollution. Non-metallic parts after cleaning shall be immediately removed from cleaner, may soak for a long time.

break down individual parts can clean with dip way, still left did not break down the non-metallic metal parts can be fine clean clean immersion cleaner silk ( In order to avoid fall off fiber adhesion on the parts) Scrub. When cleaning should remove all adhesion on the surface of grease, dirt, plastic product, dust, etc. In pneumatic valve decomposition and assembly process again, need to have the protection of the sealing parts, especially non-metal components, parts like o-rings it is best to use special tools.