Three panel without stranded _Q81F pneumatic valve ball - health level 16 p turnkey food-grade pneumatic valve ball

Q81F - 16 p three panel is stranded health level pneumatic ball valve adopts all-inclusive tee design, can prevent a medium is a kind of residual dead Angle, no residue of sterile pneumatic ball valve, pneumatic valve works in ordinary ball fundamental difference, is that the design of the sealing ring, can effectively solve the pneumatic ball valve pneumatic valve cavity fluid retention problem, often used in food, brewing, beverage, dairy products, chemical pharmaceutical and biological engineering, and many other industries. And configurable various structures, such as electric, pneumatic, manual handle, etc. , can also be equipped with control unit, the locator, such as position sensor compatible with automatic control system.







q81f - 16 p three panel without retention level health pneumatic ball valve usually take clamp connection form, can also according to the need to make welding, thread or flange, and whatever the connection mode, the pneumatic valve can be replaced, and will not change the total length of the pneumatic valve. This series pneumatic valve disassembly is convenient, without professional tools that remove the pneumatic valve operation.







three panel without retention characteristics of health level pneumatic ball valve:



1, no stranded health level pneumatic ball valve aperture size is consistent with the pipe, and the surface is smooth and no dead Angle, does not produce sediment;

2, flow channel wall and high precision polishing, and through aseptic processing, can reach the standard of health level;

3, is stranded health level pneumatic ball valve adopts the whole bag lining fluoride ( PTFE) Seal form, no other dead space and easy cleaning;

4, without retention level health pneumatic ball valve are all made of stainless steel materials refined but become, flow channel lining 0. 5 um electronic polishing, maintain fluid unimpeded.



three panel without retention level health pneumatic ball valve technical parameters:





nominal diameter

DN15 ~ DN100 ( mm)



nominal pressure

1. 0 - 1. 6 mpa




structure form three chip




pneumatic seat tightness

polytetrafluoroethylene ( PTFE) ≤ 180 ℃



link to

clamp fast loading type, welding type, thread, flange type



pneumatic valve body material

stainless steel SUS304, SUS316, SUS316L



ball core material

stainless steel SUS304, SUS316, SUS316L




polishing precision mirror polishing Ra< inside
; 0. 4 um




drive form
manual, electric, pneumatic ( Self-control is an optional switch, external regulation)




three panel without retention principle level health pneumatic ball valve:


three panel without retention of health level of the pneumatic valve pneumatic ball valve body left and right of the pneumatic valve cover end respectively in the medium of entering the chamber should fill seal seat, with the filling seal seat match the pneumatic valve core sphere of semicircular canals, in the bottom of the groove is equipped with pneumatic valve cover with the left and right of the medium flow matching the port hole, pneumatic valve core put in two packages in the filling seal seat and two filling sealing groove of joint sealing. Beneficial effects of the products is in the pneumatic valve body cavity chamber should set the two will be the space of full fill seal, in the pneumatic valve core rotates, medium can't enter the pneumatic valve body cavity, so as to realize the pneumatic ball valve without retention, at the same time, also can effectively prevent the internal contact between the pneumatic valve, pneumatic valve body to avoid internal corrosion medium pollution occur, to ensure the health level of use of pneumatic ball valve requirements.


related products: electric level health pneumatic ball valve pneumatic health level pneumatic ball valve check related knowledge: health level of pneumatic valve selection