The use of heavy cylinder manual

The normal working conditions of heavy cylinder: the medium is commonly ~ ℃, environment temperature, working pressure is commonly. ~ Mpa, ordinary cylinder speed range for ~ mm/s. Maintenance: heavy cylinder, before the installation, should by the no-load test movement, movement is normal and not leak before use. , installation of air inlet need to set the oil mist, good lubrication in the work, the reasonable of heavy cylinder lubrication is very important, often due to bad lubrication, even can't work normally. , when installation, pay attention to the movement direction, the piston rod is not allowed under eccentric load or horizontal load. , load in the travel have change, should use have enough output force of the cylinder, and the additional buffer device. , do not use a full schedule. Especially when the piston rod out, don't the collision between the piston and cylinder head, otherwise easy to cause damage to the cylinder parts. , in use should be regularly to check whether there is abnormal phenomenon, cylinder parts with and without loose connection parts, etc. Found that the problem timely repair, prevent accidents. , the heavy cylinder overhaul to assembly, parts must be clean, must not be stolen goods into cylinders, especially to prevent damage of sealing ring is cut, cut, etc. And heavy cylinder to be removed when not in use for a long time, such as piston rod part should apply anti-rust oil, into the vent should add dustproof plug.