The types of cylinder

Pneumatic transmission of compressed gas pressure can convert mechanical pneumatic actuator cylinder have do reciprocating linear motion and to do reciprocating swing two types. Do reciprocating linear motion can be divided into the single-acting cylinder, cylinder of double-acting cylinder, impact diaphragm cylinder and the cylinder. (1) the single-acting cylinder: only one end of the piston rod, air supply from one side of the piston can produce pressure and air pressure forces the pistons to generate thrust, by spring or self-respect to return. (2) : double-acting cylinder from the pistons alternately on both sides of the gas supply, power output in one or two direction. (3) the diaphragm cylinder: replace with diaphragm piston, output force in only one direction, with a spring return. It sealed performance is good, but short. (4) the impact cylinder: this is a new type of component. It put the compressed gas pressure can be converted to the piston velocity ( ~ m/s) The kinetic energy of moving to do work. (5) the rodless cylinder: no the floorboard of the piston rod of the cylinder. Magnetic cylinder, the cable's cylinder two kinds big. Do reciprocating swing oscillating cylinder cylinder said, the blade will be divided into two, its inner cavity to two cavity alternating gas supply, output shaft do swing motion, oscillating Angle is less than °. In addition, there is the rotary cylinder, gas-liquid damping cylinder, and the step cylinder, etc.