The thin cylinder is how form?

: thin cylinder by cylinder, end cover, piston, piston rod and seal. The inner diameter of the thin cylinder size represents the size of the cylinder and output force. Piston within the cylinder to do reciprocating sliding, smooth surface roughness should reach the inner surface of cylinder Ra0. 8um。 Inside the steel cylinder, should also be hard chrome plated surface, to reduce the friction and wear resistance, and can prevent rust. Cylinder material in addition to the use of high carbon steel tube, or use of high strength aluminum alloy and brass. With the exhaust his thin cylinder end cover, oil still cover with buffering mechanism. Rod side on the end cover is equipped with the seal and shield, in order to prevent air leakage and outward from the piston rod to prevent external dust entering in cylinder. Rod side on the end cover is equipped with guide sleeve, in order to improve the orientation precision of cylinder, piston rod under the small amount of lateral load, decrease when the piston rod out under bending capacity, extending the service life of the cylinder. Wear ring on the piston cylinder can be improved guidance, reduce the piston sealing ring wear, reduce frictional resistance. Long wear ring using polyurethane, ptfe, fabric material such as synthetic resin. By the width of the piston ring size and length of sliding parts necessary to decide. Sliding part is too short, easy cause early wear and jammed. Often use high carbon steel, hard chrome plating on the surface, or the use of stainless steel, to prevent corrosion, and raise the wearability of seal ring. : the role of the thin cylinder pressure of compressed air can be converted into mechanical energy, driving mechanism as a straight line reciprocating movement, swinging and rotary motion.