The structure of the stainless steel 2 cy gear pump and the scope of application

CY stainless steel pump USES: CY series stainless steel gear pump is mainly used for all kinds of mechanical equipment of conveying lubricating oil in the lubricating system, suitable for conveying viscosity for x - ~。 ×- m/s ( - CSt, temperature under ℃ has the lubrication oil. Stainless steel pump, can transport without lubrication oil, beverage, low corrosive liquid. With copper gear can handle liquid in low point, such as gasoline, benzene, etc. This series of pumps in addition to the ordinary motor, can also according to customer's need to be configured with the specifications of the explosion-proof motor. Scope of application: in the oil system can be used as a transport, booster pump; In the fuel system can be used as a transport, pressure, jet fuel pump; In all industrial areas, can be used as lubricating oil pump. Structure features: this series gear pump are mainly gear, shaft, pump body, the safety of pneumatic valve and shaft end seal. Gear after heat treatment with high hardness and strength, and shaft installed in the replaceable shaft sleeve. In all parts of the lubrication pump are pump work automatically to achieve using the output media. Pump is the drainage and back into the groove of reasonable design, is a gear in the work under the minimum torque force, so the bearing load is small, wear small, pump with high efficiency. Pump is equipped with pneumatic safety valve as overload protection, safety of pneumatic valve backflow pressure for the pump to eliminate pressure rating. Times, but also to allow discharge pressure range according to the actual need additional adjustments. But pay attention to the safety of pneumatic valve cannot be a long-term work, reduced pressure pneumatic valve can be installed in the piping shall be separately when necessary. To pump from the main shaft overhang end to see, for clockwise. Big flow gear oil pump, gear pump, handling the oil pump, oil pump, oil pump, Marine gear pump, etc. Traffic:. m/h- Pressure: m/h. MPa - - 。 MP。 Mainly used in oil fields, oil depot, ports, docks, ship big flow like oil, oil discharge.