The structure characteristics of shandong cylinder

With pneumatic components in the application of automation equipment and production lines, the popularity of cylinder works by pneumatic transmission of compressed gas pressure can be converted into mechanical energy of the pneumatic actuators. Shandong province there are many types of cylinder, many users tend to have the correct equipment operation caused cylinder type selection is not stable and the service life of cylinder reduce. General press cylinder driving mode of the structure, function, classification and installation method of cylinder. According to the structure characteristics, mainly divided into piston cylinder and cylinder diaphragm type cylinder. According to the movement form is divided into linear motion of cylinder and swinging cylinder. For reciprocating linear motion can be divided into the single-acting cylinder, double acting, diaphragm type and impact cylinder. Only a single-acting cylinder cavity can input the compressed air, air supply from one side of the piston can produce pressure, only have the piston rod end, air pressure forces the pistons to generate thrust, implement a direction. The piston rod can only with the aid of outside force to back into it. Will usually with the aid of the spring force, diaphragm tension, gravity, etc. The characteristics of the single-acting cylinder is: only one inlet, simple structure, small gas consumption; With reset spring force or diaphragm force etc, part of the compressed air energy used to overcome the spring force or tension of diaphragm, and thus reduce the lose force of the piston rod; Installed in cylinder spring, diaphragm and so on, generally shorter trip; Compared with the same volume of double-acting cylinder, effective stroke. Cylinder reset spring, the tension of the diaphragm are changing with the deformation size, as a result the output force in the process of the piston rod is changing.