The selection of the cylinder

) Based on the load status of 'cylinder' and load movement to determine the load and the load factor F, then according to the principle of using air pressure is the pressure should be less than %, according to the air pressure determined using pressure P. The single-acting cylinder according to the rod diameter and diameter ratio. , double-acting cylinder rod diameter and diameter ratio. ~。 Primary, and according to the formula can be obtained by the cylinder diameter D, the value of D for standardization. Such as D size is too big, can use mechanical force. ) Cylinder and transmission mechanism based on the actual running distance to primary cylinder stroke, for ease of installation and debugging, to calculate the distance to intensify ~ mm advisable, but not too long, so as not to increase the gas consumption. ) According to the purpose and the installation location to determine the variety of cylinder and installation form. Refer to relevant manual or product samples. ) Piston ( Or cylinder) Mainly depends on the movement speed of cylinder inlet and outlet and the tube diameter, are chosen based on cylinder into the vent connection thread sizes. In order to obtain a slow and steady movement can adopt gas-liquid damping cylinder. Normal movement speed of the cylinder. ~ m/s or so, should choose buffer cylinder of high-speed movement of the cylinder or buffer are added into the loop.