The operation of the pneumatic valve common sense

1, the pneumatic valves open and close direction of operation, all should be clockwise to shut down. 2, as the pneumatic valve in the pipeline, often artificial opening and closing, opening and closing of revolution shoulds not be too much, is the large diameter valves also should be 200 - 600 RPM. 3, in order to facilitate a person's opening and closing operation, the plumber pressure conditions, the largest open-close torque appropriate for n - 240 m。 4, pneumatic valve opening and closing operation side should be square tenon, standard and size, and face to the ground, so that people can be directly from the ground. Valves shall not apply to the underground pipe network with roulette. 5, pneumatic valve opening and closing degree of display panel (1) the degree of pneumatic valve opening and closing scale line, shall be cast on or after the transformation direction of gearbox cover plate shell, face to the ground without exception, the scale line brush on phosphor powder, as a prominent; (2) of the dial needle material under the condition of management better available stainless steel plate, or paint for steel plate, do not use the aluminum skin production; (3) dial needle striking, fixation, once the open-close adjustment accurately, the rivet lock. If, pneumatic valve buried deep, operating mechanism and display plate distance from the ground 1 or more. 5 m, should be equipped with facilities of extension rod, and fixed firmly in mind, so that people from the face of the earth observation and operation. That is to say, the valve opening and closing operation in pipe network, unfavorable under operation. Pneumatic valve manufacturer, http://www. dazkfy。 com