The maintenance of gas source processor

A. To use clean, dry compressed air as the working medium, and will be fully air blowing off with tube to prevent impurities into the system will cause poor cylinder, valve action, need lubrication to oil sprayer in the piping system, it is recommended to use the lubricating oil for transparent oil ( ISOVG) ; 2. Component overhaul completed reassemble, parts must be clean, not bringing impurities such as to within the system. 3. Cylinder, valve long-term need not when, must pay attention to the working frequency of minimum time/day; Four. Regularly check the operation condition of all kinds of pneumatic components, check the connection fastening screw loose? There is no damage to seal leakage phenomenon of components? Found that the problem handled in time; Five. Close the air supply, maintenance, be sure to advance and pipeline system of compressed air emptying rear can repair operations, to prevent accidents; Six. System normal operation, to regularly monitor the performance of the air filter, oil mist device, water in time, Except the automatic drain) , come on;