The consequences of hydraulic pneumatic valve in the hydraulic oil mixed with water

( Enter the system through the hydraulic cylinder piston rod sealing is not tight, damp air condenses into water droplets. ( Oil with water and oil when exposed to humid environment and close cooperation with the absorption of water. 。 The harm of the oil mixed with water after ( After the oil mixed with a certain amount of moisture, can make the hydraulic oil emulsification went into a state of gonorrhea. 。 Moisture in the oil into the way ( By alternating oil make the moisture in the air condenses into water droplets fell into oil. ( Cooler or heat exchanger seal damage or make water leakage oil cooling pipe burst in. ( Enter the system through the hydraulic cylinder piston rod sealing is not tight, damp air condenses into water droplets. ( Oil with water and oil when exposed to humid environment and close cooperation with the absorption of water. 。 The harm of the oil mixed with water after ( After the oil mixed with a certain amount of moisture, can make the hydraulic oil emulsification went into a state of gonorrhea. If the hydraulic oil itself emulsification resistance is poorer, rest after a period of time, water also can not be separated from oil, the oil is always in a state of gonorrhea. This gonorrhea emulsified oil into the hydraulic system, not only internal rust, hydraulic pneumatic valve element, at the same time reduce the lubrication performance, make the parts wear and tear, low efficiency of the system. ( Hydraulic system of the iron series metal rust, peeling rust flow within the hydraulic system pipe and hydraulic components, spread to spread, will lead to the entire system internal rust, produce more peeling rust and oxidation. ( Something in the water with oil additive effect and colloid pollutants such as precipitation, accelerate the deterioration of oil. ( Sulfur and chlorine in a water and oil to produce sulfuric acid and hydrochloric acid, make the abrasion wear of components, also accelerate the oxidation of oil, and even produce a lot of sludge. ( These water pollutants and oxidation products, immediately become further oxidation catalyst, eventually leading to blocked or jammed hydraulic components, hydraulic pneumatic valve system caused by the action failed, and block, cooler efficiency lower and oil filter clogging and a series of failures. ( In addition, in low temperature, the water condenses into tiny ice crystals, also easy to jam the control element of clearance and death. http://www pneumatic pneumatic valve manufacturer. /。