Rotating cylinder manufacturers, 90 - degree rotating cylinder, domestic precision pressure regulating valves, rotary cylinder, pneumatic precision pressure regulating valve, precision pressure regulating valve manufacturers

Pneumatic components used in the place such as rolling mill, textile production line, be careful in the work of the use of pneumatic components, otherwise it will cause significant losses, to introduce the following precautions when using pneumatic components. One, understand wholesale pneumatic joint element should not exhaust vent is flat. If there is a small amount of air leakage, explain pneumatic components exist in the early damage. If no lubrication, should check whether the installation position of oil mist detector, the specifications of the selected is appropriate, drops of the adjustment of the oil amount is reasonable, management method is in accordance with the requirements. If there is a condensed water discharge, to check whether the location of the filter is suitable, in addition to the selection of water element is reasonable. Leak because or cylinder sealing in the valve position, poor caused by low air pressure. Second, the rotating cylinder manufacturer of pneumatic components of all the products in use, keep in the specified working pressure voltage range. In water or oil droplets and dust environment too much, must cover the cases to avoid the damage of the product. Don't use fluid or air containing corrosive substances, in order to avoid damage of pneumatic components. Third, in the operation of the pneumatic components wholesale gas source processor, don't touch switch, to avoid electric shock caused by the short circuit or circuit error, also do not place items on the above, in order to avoid the loss caused to the human body and damage to the machine, device, it is also possible for the risk of dysfunctional control caused the damage of the product. Four, understanding the oil content in the exhaust is moderate, can be a clean white paper in vent near the reversing valve, working in a reversing valve after three or four cycle, if only a very light spots on white paper, lubrication effect is good, and to know whether there is condensate in the exhaust.