Pulse electromagnetic valve classification and use of the point

Pulse electromagnetic valve classification and use of the key time pulse electromagnetic valve is pulse blowing dust device of actuators and key components, main points, right Angle type, submerged type and straight through three categories. Rectangular pulse valve is characterized by valve air in and out of the tube into ° Angle, therefore calls right Angle valve. Rectangular pulse inside the solenoid valve diaphragm divides into the pulse valve before and after the two air chamber, when turn on the compressed air, compressed air after intercepting hole into the chamber, and the air chamber pressure after the pressed diaphragm valve, the output pulse valve in the closed state. The electrical signal of pulse injection control instrument making pulse electromagnetic valve armature, pulse valve chamber after open vent hole, rapid loss of pressure chamber, diaphragm backward-shift, compressed air blowing through the valve output, pulse valve is fully open. Instantly from the inside out, compressed air blowing air. When pulse control instrument signal disappears, reset the armature, vent gas chamber after closed, air chamber pressure after the diaphragm valve outlet and pulse valve is closed. Submerged pulse electromagnetic valve with submerged in the installation method of gas bag, therefore calls in line. Compared with other forms, flow to reduce the resistance and reduce the air pressure is blowing, and can adapt to the low pressure situations, and can reduce energy consumption and extend the life of the diaphragm. Submerged pulse valve working principle is the pulse valve diaphragm into before and after the two room, when turn on the compressed air, compressed air after through orifice into the chamber, the gas chamber pressure will diaphragm valve outlet, clinging to closed. Explosion-proof solenoid valve, high pressure gas solenoid valve solenoid valve, solenoid valve, steam, water use, electromagnetic valve, electromagnetic valve, and so on professional custom production are welcome to call technical support hotline director wang