Pneumatic valves are commonly used connection form

,
flange connection is this connection form of pneumatic valve used most frequently. According to the joint surface shape can be divided into the following kinds: smooth type: used for pneumatic valve pressure is not high. Processing more convenient lenticular: high work pressure, can be used in hard gasket mortise type: plastic deformation is larger washers are available, and in the corrosive medium is used more widely, the sealing effect is better. Trapezoidal groove: with oval metal ring gasket, used to the work pressure or greater kilogram per square mile
,
clamp connection bolts directly to the pneumatic valve and the connection forms of two pipe clamp wear together. Connection

and butt weld ends, threaded connections,
this is a simple connection method, often used for small pneumatic valves. Divides two kind of situations: direct seal: internal and external screw thread sealing effect directly. In order to ensure that joint not leak, often filled with lead, cotton and ramie thread woven and ptfe teflon tape; The ptfe teflon tape, became more and more widely used; The corrosion resistance of the material is very good, good sealing effect, easy to use and preservation, remove, can be fully removed, it because it is a layer non-viscous film, much more superior than lead, cotton and ramie thread woven. Indirect seal: the power of the screw tight, transfer to the gasket between the two plane, plays a role of sealing washer.
, card sleeve connection
in our country developed in recent years, the connection and sealing principle of it is that when the screw nut, card sets of pressure, the blade is biting into the tube outer wall and card sets of male cone and cone closed and joint under pressure, and thus can be reliably prevent leakage. The advantage of this connection form is: small volume, light weight, simple structure, disassembling easy; The relay is strong, wide use, resistant to high pressure, Kg/cm2, high temperature ( ℃ and impact vibration can choose a variety of materials, suitable for corrosion protection; Machining accuracy is not high; High altitude makes the pipes easier to install. At present, the card sets of connection form, has been used in some small pneumatic valve products in China.
,
clamp connection, it is a fast connection method, it only need two bolts, often apply to remove the low pressure pneumatic valves.

above, since the tight connection connection form, all is the use of force to offset the medium pressure and sealed. Here using medium pressure since the tight connection. Its sealing ring with cone, with medium relative to one side with a certain Angle, within the medium pressure to the cone, and passed to the sealing ring, on the cone Angle, produce two component, a parallel to the center line of the pneumatic valve, outward pressure pneumatic valve body wall to another. This component is the force behind. The more the greater the medium pressure, since the tight force is big. So this kind of connection form, suitable for high pressure pneumatic valves. Than the flange connection, to save a lot of material and manpower, but also need a certain pre-tightening force, in order to pressure pneumatic valve is not high, the use of reliable. Using the close sealing principle of pneumatic valves, is generally high pressure pneumatic valves.
pneumatic valve connection form also many, for example, some do not have to dismantle the small pneumatic valves, together with the pipe welding; Some non-metallic pneumatic valve, use socket type connection, and so on. Pneumatic valve users according to Hugh situation specific treatment.