Pneumatic valve positioner installation instructions

, install the pneumatic valve positioner and al plate fixed together, the way is open the pneumatic valve positioner watchcase, with 3 M * screw through the shell only three holes and installation plate connection.
, the pneumatic valve positioner of feedback component connected to the actuator, will adjust the pneumatic valve pneumatic valve stem nut loosen, the plate is inserted in the feedback components in indicator between the coupling nut and tighten.
, will be equipped with the installation of the pneumatic valve positioner al plate and actuator support two screw holes have M * screw fixed at the desired position. Feedback, the feedback of connection plate connection pin inserted into the pneumatic valve positioner CAM feedback dry in the open slot.
and different types of actuators should ensure that when the pneumatic valve position in %, CAM feedback pole should be in a horizontal position.
, will adjust after each part of the installation of a fixed lock.