Pneumatic valve installation instructions

, before installation should refer to the instruction manual of the product, whether to meet your demand.
and piping should be rinsed clean before using, medium to clean the filters should be installed, and not to prevent impurities may not impair the normal work of the solenoid pneumatic valve.
one-way pneumatic valve, electromagnetic general works, not reverse, the movement direction of the arrow on the pneumatic valve is line, must be consistent.
pneumatic valve, electromagnetic general level of the pneumatic valve installation, vertical coil, there are some products can be installed arbitrarily, but best vertical when conditions permit, to increase service life.
pneumatic valve, electromagnetic freezes in place to work shall be heat treated, or set the heat preservation measures.
, the electromagnetic coil lead wire ( Connectors) After connection is good, should confirm whether firm, join electrical components contact should not shake, loose will cause electromagnetic pneumatic valve does not work.
and continuous production of solenoid pneumatic valve, had better use the bypass, easy maintenance, does not affect production.
, long after discontinuation of electromagnetic pneumatic valve, should be no clear condensation rear can use. When unpick and wash all parts are to put away again restorable installed in sequence.
, an unidentified place, please contact with little company, serve you wholeheartedly.