Pneumatic pneumatic valve solenoid pneumatic valve cannot close a solution

solenoid pneumatic valve at work occasionally will appear the phenomenon of electromagnetic pneumatic valve cannot close, the possible reasons might be: the Lord or moving iron core of seal pneumatic valve core has been destroyed, fluid with high temperature, viscosity, impurities into the solenoid pneumatic valve, spring had come to life or deformation, etc. What are the solutions for these problems and the? Next, the author analyzes the reasons of solenoid pneumatic valve cannot close and electromagnetic pneumatic valve cannot close a solution.
seal damage, the main pneumatic valve core:
solution: recommend replacing the seals.
and orifice balance hole jam:
solution: wash in a timely manner.
, viscosity or fluid temperature is too high:
solution: recommend replacing counterpart solenoid pneumatic valve.
and impurities into the solenoid pneumatic valve pneumatic valve core:
solution: this case suggest cleaning.
, spring deformation:
solution: suggest replace the spring.
and working frequency is too high in life is to:
solution: Suggestions for products or product update.
through the analysis of these six kinds of phenomenon and the solution of the predecessors' summary experience, we may safely draw the conclusion is that the electromagnetic pneumatic valve in use will have a problem, but the good news is that these problems we all have the corresponding solutions, it is this kind of product for the users are more trustworthy. With the increase electromagnetic air valve using range, may need to researchers and related businesses need to do more work and preparation to meet the demand of the market.