Pneumatic diaphragm pump operation note 1)

pneumatic diaphragm pump is compressed air, driven by the reciprocating diaphragm deformation caused by the volume of the volume change of pump, its working principle is akin to plunger pump. Runtime operating pneumatic diaphragm pump, attention should be paid to the following:
, in order to ensure the largest fluid in the pump does not exceed the highest standards of secure channel diameter particles.
the pump inlet pressure should not exceed the maximum allowable working pressure, more than the rated pressure of the compressed air can cause personal injury and property damage and damage the pump performance is higher.
to ensure that the pump can withstand the pipeline system, the system has reached the highest output pressure air system, to ensure that the drive clean and normal working conditions of pressure.
, caused by electrostatic spark may cause casualties and property losses, the need to use a large enough area on the conductor of the pump and the correct earthing grounding screw.
with the local legal requirements and regulations, as well as some special requirements, according to the field grounding requirements.
and tighten well pump and connecting pipe connector, prevent electrostatic spark friction vibration. Use anti-static hose.
, and the reliability of the grounding system, should be inspected regularly for grounding is less than the ohmic resistance test.
, maintain good ventilation and exhaust, away from flammable and heat.
the effluent of the pump may contain solid, not exhaust workspace or in front of people, in order to avoid personal injury.
when the diaphragm failure, material transportation will discharge from the exhaust muffler.
when flammable, poisonous liquid transportation, port set line received a safe place, away from the workspace.
, using at least/' of the diameter of the light wall tube muffler outlet connection.
, fluid pressure may cause serious personal injury and property damage, please don't at the pump, pump and pipeline system, any repair work, such as the need to do maintenance, to cut off the water inlet of the pump, open the pressure relief agencies bypass pressure pipeline system, slowly loosen the connection pipe joint.
, such as for dangerous and poisonous liquid pump, please don't directly to the manufacturer to repair the water pump is put forward. Properly handle with the local laws, regulations, and use the original accessories, with wang shore displacement pump company in order to ensure life.
, part of the aluminum alloy liquid pump use, does not contain Fe + is used to transport liquids and halogenated hydrocarbons and other halogenated hydrocarbon solvents, corrosion pump caused by the rupture.
to ensure that all the exposed part of the body will not be transported fluid conveying corrosion damage.
to ensure that all operators in the use and control of the pump running safety precautions, when necessary, the allocation of the necessary protective equipment are familiar with.
, proper use of the pump, the air does not allow for a long time operation. Keywords:
this site pneumatic ball valve pneumatic ball valve pneumatic pneumatic valve pneumatic pneumatic valve pneumatic butterfly valve pneumatic butterfly valve pneumatic actuator pneumatic execution