- pneumatic ball valve How do I select the pneumatic valve material under high temperature condition

working condition of high temperature air valve is mainly refers to the high temperature of pneumatic valves used in oil refinery. Working condition of high temperature including high temperature, high temperature Ⅰ Ⅱ, high temperature, high temperature Ⅲ Ⅳ, high temperature, high temperature Ⅴ level, the following were introduced. , and high temperature and high temperature refers to the working temperature of pneumatic valve in ~ ℃ area. If the medium is water and steam, mainly use WCB, WCC, A, WC and WC. If the medium is oil, sulfur mainly use C with sulfide corrosion resistant, CF, CF, CFM and CFM. They use of crude distillation unit and delayed coking unit in the refinery, the CF, CFM, CF and CFM material pneumatic valve is not used in corrosion resistance to acid solution, but for sulfur oil and oil and gas pipeline. In this condition, CF, CFM, CF and the highest working temperature limit for CFM ℃. Level, high temperature Ⅰ pneumatic valve working temperature for ~ ℃ high temperature Ⅰ level ( Hereinafter referred to as PI) 。 Grade PI pneumatic valve body material as the CF ASTMA standard as the fundamental form of 'high temperature Ⅰ class in carbon chromium nickel titanium rare earth high quality heat resistant steel'. As PI level is a specific name, contains high temperature stainless steel (here P) The concept of. Therefore, if the working medium is water or steam, although high temperature steel WC (can be used t≤℃） Or the WC ( t≤℃） , although high temperature can be used when product sulfur steel C ( ZGCrMo） , but here can't call them to PI. Grade, high temperature Ⅱ pneumatic valve working temperature as ~ ℃, as the high temperature Ⅱ level ( Referred to as P Ⅱ level) 。 P Ⅱ level high temperature heavy oil catalytic cracking unit of pneumatic valve is mainly used in oil refinery, it contains three rotating nozzle used in lining of parts such as high temperature wear resistance brake pneumatic valve. P grade Ⅱ pneumatic valve body material as the CF ASTMA standard as the fundamental form of 'high temperature level Ⅱ carbon chromium nickel and rare earth, titanium in tantalum type heat resistant steel'. Grade, high temperature Ⅲ pneumatic valve working temperature as ~ ℃, as the high temperature Ⅲ level ( Referred to as P Ⅲ level) 。 P Ⅲ level high temperature pneumatic valves are mainly used on large heavy oil catalytic cracking unit in the refinery. P level Ⅲ high-temperature pneumatic valve body for the CFM ASTMA standard as the fundamental form of 'high temperature Ⅲ carbon chromium nickel molybdenum in rare earth, titanium tantalum enhanced heat resistant steel'. Grade, high temperature Ⅳ pneumatic valve working temperature as ~ ℃, as the high temperature Ⅳ level ( Referred to as P Ⅳ level) 。 The P level Ⅳ pneumatic valve operating temperature limit as ℃ because the standard ASMEB pressure pneumatic valve design is chosen Offer a maximum temperature of ℃ temperature rating ( υ） 。 In addition, after more than ℃ temperature work, steel is close to enter the forging temperature region, the metal in the plastic deformation range, metal plasticity is good, hard to work under high pressure and impact force and deformation. P Ⅳ level in the body of the pneumatic valve material for ASTMA standard CFM as fundamental form 'high temperature Ⅳ carbon chromium nickel molybdenum in rare earth, titanium tantalum enhanced heat resistant steel'. CK - And ASTMA standards in F ( The content of C % or higher) , FH heat-resistant stainless steel, etc. Level, high temperature Ⅴ pneumatic valve working temperature & gt; ℃ above, such as source of abundant pneumatic valve industry production of series of ultra high temperature butterfly valve, called high temperature Ⅴ level ( Referred to as P Ⅴ level) 。 Pneumatic valve (P Ⅴ level high temperature Be cut off by pneumatic valve, rather than the external regulation pneumatic valve of pneumatic butterfly valve) Special design methods must be used, such as lining insulation lining or water or air cooling, etc. , can guarantee the normal work of the pneumatic valve. So, level of P Ⅴ high temperature pneumatic valve operating temperature limit does not make the rules, this is because the working temperature of the pneumatic control valve is not only material, but with the special design method to solve, and the basic principle of design method is the same. P Ⅴ level high temperature pneumatic valves according to the pressure of work and working medium and the special design methods and so on, choose reasonable, can satisfy the pneumatic valve material. In P Ⅴ scale high temperature pneumatic valve, normally the flue flashboard pneumatic butterfly valve or pneumatic valve to the board or the butterfly plate the HK - often choose ASTMA standard 香港- High temperature alloy, they can under ℃ oxidation and corrosion in a reducing gas, but it can't withstand the impact and pressure load. Fuyang source abundant regulation of pneumatic valve industry co. , LTD. Is a professional pneumatic valve manufacturers, the main products are various types of pneumatic regulating pneumatic valve, electric pneumatic valve, self-reliance type adjustment pneumatic valve, pneumatic valve, high performance butterfly nitrogen sealed pneumatic valve and various special pneumatic valve manufacturing and supporting.
YAZE( Pneumatic company's main products: pneumatic pneumatic valve pneumatic ball valve pneumatic butterfly valve Keywords: pneumatic pneumatic valve pneumatic pneumatic valve