Pneumatic actuator mainly consists of two parts? What effect does each have

is an important part of a pneumatic valve pneumatic actuators, determines the execution efficiency of pneumatic valve as a whole. Including pneumatic ball valves, pneumatic butterfly valve, pneumatic valve, pneumatic valve, pneumatic valve, pneumatic valves, pneumatic actuators for them is of great significance. The pneumatic components factory in zhejiang province is to make a brief introduction of pneumatic actuator which is mainly composed of two parts and each have some effect. Pneumatic actuators by actuator and control valve ( Regulatory agencies) The two parts. Regulating mechanism and type of structure is roughly same, mainly actuators are different. So when the pneumatic actuators is introduced is divided into two parts of the actuator and control valve. Adjusting mechanism is adjusting part of the pneumatic actuators, according to the size of the control signal, generate the corresponding thrust, promote regulator action. Under the action of thrust actuator, valve produce certain displacement or corner, regulating the flow of fluid directly. Pneumatic device is mainly composed of cylinder, piston, gear shaft, end cover, seals, screws, etc. Complete sets of pneumatic device should also include the opening instructions, limit, solenoid valve, locator, pneumatic components, manual institutions, and signal feedback etc parts. Pneumatic actuators include GT series, series of ats, AW series, many models and categories, can be applied to different types of valves, different diameter pressure and different requirements of the valve.