Need to be aware of when using cylinder, cylinder at a time

Using clean, dry compressed air. Must not contain any organic solvent in the air, synthetic oil, salt, corrosive gas, etc. , in case of the cylinder, valve failure. Before the installation. Connecting pipe internal fully purge, don't be late, dust, chip seal to the cylinder, valve magazine. In the dust, water, oil, surface should be to slip case, installation, do not distort the state. Cannot use telescopic protective sleeve cylinder should be used, or have a strong defense shield tunnel. Environment temperature and the temperature of the medium in cylinder, if the magnetic switch than C, no magnetic switch, if it is beyond. In a strong magnetic field environment, should choose automatic switch with strong magnetic fields. In the sealing ring of fog or mist mist cannot use the standard cylinder. Oil to the oil cylinder, should configure appropriate oil mist mist. Don't give oil lubrication, short stroke cylinder due to cylinder added grease in advance, can use for a long time. The cylinder can also be used, but once in the oil, it may not stop the oil. Due to the additive may have been washed away grease, rather than oil will cause the bad cylinder. The piston rod can only carry axial load on the piston rod. In order to avoid lateral load and eccentric loading in the application of the piston rod. When there is a horizontal load, the piston rod should be combined with guide, or use the guide tube, etc. Cylinder, cylinder should be installed, and prevent looseness, deformation and measures you back. When installing a fixed cylinder, piston rod axis load and must be consistent. Installing a ring and cylinder trunnion type, should guarantee the cylinder swings and load on the plane. Otherwise, the light seals are often eccentric wear, resulting in leakage, reduce the service life of cylinder; Cylinder to be not moved. Things, there will be impact in cylinder, may cause harm to the body and gear sliding part of the oil cylinder and the piston rod is not damaged, prevent damage of cylinder, piston rod sealing ring, etc. Maintain a space cushion valve should be set aside the appropriate adjustments, magnetic switch, such as the proper installation and adjustment should be reserved space. If you don't use cylinder for a long time, should be in a month's time, and applying, prevent rust. Usually used in oil, rather than to the cylinder cannot serve as the rodless cylinder, in the case of oil spill.