Jinan and working principle of the rotary cylinder model classification

Jinan, also known as rotary rotary cylinder clamping cylinder on its working principle is the cylinder piston rod is a trough, mounted on the front cover or at the cylinder convex device with trough, using pneumatic or hydraulic drive, piston and piston rod in implementation work first complete rotation, after waiting for the position and Angle of rotation to design complete clamping action ( A straight line down and clamping workpiece) 。 Jinan rotary cylinder work when the axial movement of the piston rod has a certain Angle, General degree) Rotary, can also be customized according to the requirements of using other angles. Usually mounted on the piston rod beam clamp or other special fixtures, which can realize the downward motion rotary clamping workpiece, loosen the workpiece processing after the completion of the rise, and then back in situ, mainly is the cross arm pressure plate to avoid workpiece location convenient change. Jinan rotary cylinder in the current automation production lines and clamping smelting equipment industry application is very extensive, especially in the coastal areas of electronics manufacturing industry with CNC jig used in great quantities, the wear-resisting performance of the rotary cylinder rotate pole higher than the peers. According to the working principle of the rotary cylinder with job requirements, the day silver rotary cylinder parameters and model classification is as follows: rotary Angle: degree, turning direction: turn left, turn right two ways to choose from, rotary cylinder bore:,,,,,,, installation method: installing hole, rodless side flange, rod end can be mounted to the horizontal arm. Have certain rotary rotary stroke: stroke, different diameter also have change. Inhaler clamping stroke:, many to choose from.