JB cylinder piston rod common problems

JB cylinder as not precision instrument of precision instruments, although in most cases more substantial good feed, but in view of the individual components were 'fragile', its piston and piston rod need us to pay special attention to and study place, because, when they appear problem, will cause the cylinder fault occurs, thus affect the normal work and use, so can't be sloppy and careless. So today, based on the importance of it, just take more the new opportunity, to analyze and explain well, thus to make everyone understand that, in turn, can be encountered in practice, to cope with. Common because of the failure there are two main types of piston and piston rod phenomenon as follows. Fault a: JB cylinder appears outside internal leakage or leakage JB cylinder leaks, whether inside or outside, its reason, because of the piston rod installed eccentric, or have a scar on the piston rod. At this time, the adjustment should be made for the piston rod, or replace the new one. Fault 2: cylinder output force is insufficient, or smooth action does not appear this problem, its reason, is the piston and piston rod was stuck, or the card is dead. So at this time, appropriate adjustments should be made for the piston rod centre have blocked should keep clear and smooth. JB cylinder piston and piston rod need us to pay special attention to and study, hope in the later days all of this on the one hand, more careful.