JB cylinder maintenance methods

Use shall comply with the relevant safety standards, JB cylinder when a failure occurs, should have an emergency stop device. After work, the cylinder internal compressed air shall be emissions. Maintenance and maintenance methods: JB cylinder, JB cylinder overhaul to assembly, the parts must be clean, to prevent damage of sealing ring is cut, in particular, pay attention to the dynamic sealing ring installation direction. , use should be regularly check each part of the cylinder in the presence of abnormal phenomenon, the connecting parts for loose, etc. , the activities of the installation of the cylinder shaft pin type parts should add lubricating oil regularly. , JB cylinder when not in use for a long time, all the processing surface should be coated rust-proof oil, into the vent should add dustproof plug. , JB cylinder overhaul to assembly, parts must be clean, must not be dirt into the cylinders. Shall prevent damage of sealing ring is cut, and special attention dynamic seal installation direction. , to develop a cylinder of the month, season, year of maintenance system, JB cylinder, piston will hit cylinder head, cylinder head sealing ring buffer for the wearing parts, sealing ring buffer if severely damaged, will make the cylinder before the trip end, cushion plunger and seal is not good sealing and lose cushion. Long period using cylinder, is generally going to replace the sealing ring, at the same time on the grease.