Hydrophobic pneumatic valve installed filters

hydrophobic pneumatic valve installation is appropriate, to the normal work of the hydrophobic pneumatic valve and equipment has a direct impact on production efficiency. Installation of hydrophobic pneumatic valve must be installed according to the formal requirements, to make hydrophobic pneumatic valve and equipment to achieve the best working efficiency. 。 Before installing the hydrophobic pneumatic valve must be used with pressurized steam purging pipes, clear away the clutter in the pipeline. 。 Hydrophobic pneumatic valve should be installed before the filter, ensure that hydrophobic pneumatic valve from the piping sundry jam, regular cleaning filter. 。 Hydrophobic before and after pneumatic valve pneumatic valve installation, convenient hydrophobic pneumatic valve repair at any time. 。 The condensate flow to consistent with hydrophobic pneumatic valve installation arrow mark. 。 Hydrophobic pneumatic valve should be installed at the lowest equipment export, discharge frozen water in time, avoid tube produce steam resistance. 。 If there is no location equipment at the lowest hydrophobic pneumatic valve installation, should add a departure is bend in the lowest outlet locations ( The condensate increased joint) , the condensation water again after improve hydrophobic pneumatic valve, lest produce steam resistance. Hydrophobic pneumatic valve outlet pipe should not be submerged in the water. （ If it is immersed in water, should drill a hole in the curved, destroying the vacuum, prevent sand back to the suction. ） 。 Mechanical type hydrophobic pneumatic valve to install. 。 Pneumatic valve steam traps do not install in series. 。 Each device should be installed each hydrophobic pneumatic valve. 。 Before the hot static type of trap pneumatic valve need to have more than one meter is not too cold tube of the heat preservation, other form hydrophobic pneumatic valve should be close to the equipment. Drum drying ( With siphon type) Hydrophobic pneumatic valve is used in the equipment please indicate: choose the hydrophobic pneumatic valve with the steam resistance device, avoid steam locking device. Hydrophobic after pneumatic valve such as the condensate recovery, hydrophobic pneumatic valve outlet pipe should be recycling manager on top of the main access, reduce the back pressure, prevent backflow.