How to operate and maintenance pneumatic tools - Pneumatic pneumatic valve

pneumatic tools operation and maintenance. Right: the generation of gas supply system inlet pressure in tools (at the entrance Gas pressure of the air compressor is commonly PSIG ( 。 Kg/cm ^, too high, too low are detrimental to performance and life of tools. Intake must contain sufficient lubrication, to get sufficient lubrication tools in pneumatic motor ( Can buy a white paper on tools exhaust place to examine whether there is oily be soiled, normal to oily be soiled. Intake must do not water, if the shrinkage zhuang air without air drier is inappropriate. 。 An arbitrary removal tool parts after the operation, in addition to affect the safety of the operator cause tool damage. 。 If the tool failure or slightly by using cannot achieve its function, cannot again continue to use, check immediately. 。 On a regular basis ( About once a week for inspection, maintenance tools, add butter ( Grease in the bearing rotating parts, add oil, Oil in the pneumatic motor parts. 。 Use various tools, be sure to use comply with all safety rules and instructions. 。 Should choose the appropriate tools work, tools too easy work damage, tools a little easy to cause damage.
YAZE( Pneumatic company's main products: pneumatic pneumatic valve pneumatic ball valve pneumatic butterfly valve pneumatic actuator