High-profile ACCUAIR authentic solenoid pneumatic valve repair methods and maintenance

ACCUAIR pneumatic suspension from Reno and Heon two brothers since founded in California, has been committed to the development of pneumatic suspension control system, and to control rising pneumatic suspension operations to a level of art, is one of the top of the world's sales of pneumatic suspension products products. In nearly two years in the United States SEMA modified show, most of the low on modified models are from ACCUAIR.
high-profile ACCUAIR authentic solenoid pneumatic valve repair and dismantling method and maintenance
ACCUAIR pneumatic suspension system is the most commonly used to e - in the system Level control handle, the control handle can precision lifting vehicle anytime and anywhere in the car, it will be benefited from the sliding resistance sensor installed in the chassis. Different from other brand control induction device, it does not go to induction air pressure value, by numerical will be affected by temperature, pressure will be affected by the surrounding environment, storage memory patterns become chaotic. Sliding resistance sensor is controlled by the current, not subject to any environment and the influence of temperature, mechanical memory storage model, and also can realize a lot of additional features.
such as: ignition automatically up to set a good ride height, load fine-tuning mode ( Open state, the vehicle four wheel set in losing balance automatically restore balance state, can also close, single wheel trimming ( Under open position, it is assumed that the vehicle parked on a slope, ECU will automatically keep body level, can also be closed, and so on. In ACCUAIR pneumatic suspension system not only has a e - Level with control module for four-wheel independent lift adjustment, lifting speed adjustment, automatic filling gas, and other functions, can also through the development of new iLevel systems and control, use WIFI to implement of vehicle height adjustment, reservoir pressure and compressor state and real-time car shows and other functions, through the mobile phone of vehicle for lifting operation. In addition to the control system, air pump and cylinder is the most flamboyant of the big guy in the suit. While ACCUAIR is equipped with a twin compression air compression system, provides the suspension balloon is both quick and quiet inflatable experience. And can support a air pump, can make up for the weight of the vehicle lift difficult problem.
e- Level controller can also change the compression ratio, air pump in order to provide more high quality car to enjoy. Used to store the air gas bomb has two optional size, large storage tanks, an inflatable, can control the vehicle lift many times. Aluminum tank, is also very light in weight, does not increase the burden of the car, at the same time, high intensity, and can be arbitrary spraying into the color that oneself like. Now too much modified shop problem is solenoid pneumatic valve leakage, or dirt jam
ACCUAIR authentic solenoid pneumatic valve, is need to pay attention to the details of the construction of the environment must be good! Maintain a clean and tidy occasion! Solenoid pneumatic valve to pay attention to the inside of the sealing ring, place the position must be inside the pressure tank! This after unscrewed the screw with the hook pliers, there is a spring! Pay attention to take out time, slowly, to prevent spring pop up! This is the dirty thing! Sometimes a little above the hard tube or hose above crumbs of aluminum, once will appear inside a flat, dirty things to resist sealing ring, not angry!