Before the installation of electric pneumatic - valve simple operation

Electric pneumatic regulator is the most suitable work for the installation of piston top at the bottom of the horizontal. Temperature sensor can be installed in any position, the length must be immersed into the accused of medium. Electric pneumatic control valve generally includes drive, receive the drive signal ( 0 - 10 v or 4 - 20MA） Adjusted to control the valve, can also according to the need of control, intelligent network control system, optimization control to realize remote monitoring. The control system, the new design, installation to ensure pneumatic - valve when driving to work, and make the system safe operation, a new valve before installation, should first check valve on the nameplate marking is consistent with the design requirements. At the same time also respond to the following project debug. The basic error limits; All the schedule deviation; Back to the poor; Dead zone; Leakage, in demanding situations.