Ball float hydrophobic pneumatic valve installation

and when installation, pay attention to air the direction arrow on the valve body and flow direction of medium in the pipeline should be consistent. , before cleaning tube equipment, remove impurities, so as to avoid blockage.
and may be frozen, antifreezing measures should be taken.
, for without a filter of pneumatic valve, steam trap shall be installed in front of the pneumatic valve filter, the flow area shall not be less than the channel area. Times, the location of the filter should be set in the easy to tear open outfit.
, the floating ball type hydrophobic pneumatic valve must be installed under low steam equipment and drainage, easy maintenance, and centralized arrangement as far as possible, in order to facilitate management, connection should be firmly connected.
and the winding g ball float hydrophobic pneumatic valve installation is complete, need to hydrostatic test, testing pressure is the same as the piping system's test pressure.
and installation practices requirements see national architectural design standard atlas R of the steam condensate recovery and hydrophobic device selection and installation of sample and the manufacturer.
YAZE( Pneumatic company's main products: pneumatic pneumatic valve pneumatic ball valve pneumatic butterfly valve pneumatic actuator