Balance the pneumatic valve specifications ( - 01) With the technical parameters ( 2)

BSPN ANSIB terminal connection. CL.
has good flow properties, balanced pneumatic valve is a kind of special function of pneumatic valve. A pneumatic valve opening instructions, opening the lock and small pressure pneumatic valve for flow measurement. Using special intelligent instruments, pneumatic valve figure number and input the opening value, according to the measured differential pressure signal can be directly shows that flows through the balance of the pneumatic valve flow value, as long as in the selection and user entry on the balance of the appropriate specifications pneumatic valve, with special intelligent instrument for one-time debugging, it can make the flow of each user to set value.
balance pneumatic valve specifications ( -
number part name material serial number part name
pneumatic valve body material of carbon steel iron
open dial pneumatic pneumatic valve bonnet cap carbon steel stainless steel stem
rubber o-rings cover nut bolt
spring stainless steel stainless steel stainless steel pin
butterfly plate nitrile rubber stopper is packing recoil plate filter stainless steel cast iron casting copper

packing bronze filtering water mouth brass
balance pneumatic valve technical parameters ( -
oil is suitable for liquid water.
kg/c ㎡ for internal pressure Max.
℃ special requirements: Max ℃ for temperature Max.
by adjusting pressure difference. 。 KGF/c ㎡
leakage