Shandong QGB cylinder development prospect

With the gradual development of society, many industries are gradually thriving. Shandong QGB cylinder works according to the size of the work force needed to determine the thrust and tension on the piston rod. In order to select the output force should make the cylinder when the cylinder is slightly allowance. If picked the small cylinder diameter, the output power is not enough, the cylinder does not work; But the diameter is too large, the device not only heavy, high cost and the gas consumption increases at the same time, cause energy waste. In fixture design, should as far as possible the power mechanism, in order to reduce the size of the cylinder. ( ) Shandong QGB cylinder system is very simple. Usually due to motor with cylinder body integration, coupled with the controller and cables, the electric cylinder of the whole system is made up of these three parts, simple and compact. ( ) Shandong QGB cylinder to stop the location of the number and high control precision. General electric cylinder has the branch of low-end and high-end, low-end products of stop position,,,,, etc, are vary according to the company; High-end products is can be hundreds or even thousands of position in order to achieve. In terms of accuracy, electric cylinder also has the absolute advantage, positioning accuracy can reach. Mm, so often used in the industries of electronics, semiconductor and other precision. ( ) Shandong QGB cylinder strong flexibility. There is no doubt that the flexibility of electric cylinder is far stronger than the cylinder. As the controller can be directly connected with PLC, motor speed, positioning and positive &negative can realize accurate control, to a certain extent, electric cylinder can according to need to exercise at will; Due to the compressibility of gas and produced by the movement of inertia, even if the reversing valve with magnetic switch between cooperate again good also cannot achieve the cylinder of accurate positioning, flexibility is impossible.