Install the solenoid valve need to pay attention to what?

Install the solenoid valve need to pay attention to what? Between CSST exhibition is large than the electromagnetic valve installation should pay attention to the following points, the working medium of solenoid valve should be clean and no impurity particles, electromagnetic trims on the surface of the dirt and filters, need to clean on a regular basis. , install solenoid coil up, and keep the vertical position, the arrow or mark in the solenoid valve should be consistent with the pipe flow, shall not be installed in places with splashing water or water leakage. , water with solenoid valve solenoid valve before installation, piping must be clean. The installation of the filter in front of the valve is recommended, steam pipe installation steam trap. , in the pipeline system, installed on the branch of the electromagnetic valve size should be less than the main valve. , electromagnetic valves cannot be used in explosion hazard. , can't install the valve in the pipeline dips, lest because of steam condensation water, such as precipitation of impurities in the valve and prevent action. , the electromagnetic valve failure occurs, in order to timely isolation solenoid valve, and ensure the normal operation of the system, the best install bypass device. , water electromagnetic valve in the pipeline under rigid, recommend to use before the valve pipe bracket, so as to avoid electromagnetic valve caused by vibration while working. , water use electromagnetic valve before installation, pay attention to see the product sign, read the instruction for use, to determine whether a product conforms to the conditions of use. , water use electromagnetic valve should be installed on the pipeline before and after the pressure gauge, in order to observe the pipe pressure.