Angle of pneumatic valve working principle, technical parameters and type selection

Angle of a pneumatic valve is introduced
Angle of pneumatic valve to maintain the velocity can save a space. It USES a single function pneumatic actuators with spring security protection to operate the orientation Angle of pneumatic valve. When using, should choose the normally open or normally closed.
Angle seat frequently, pneumatic valve is widely used in a short time with a responsive, action are features of accurate, use with electromagnetic air valve, using pneumatic control can accurately control the gas and liquid flow. Can realize accurate temperature control, drops of liquid such as request.
damp and hot steam sterilization cabinet application Angle seat pneumatic valve control accurate temperature control.

Angle principle and technical parameters of pneumatic valve
Angle of pneumatic valve to maintain the velocity can save a space. It USES a single function pneumatic actuators with spring security protection to operate the orientation Angle of pneumatic valve. When using, should choose the normally open or normally closed.
products made of stainless steel casting and ptfe. Can be used in most of the gas and liquid. Steam and erosive. It comes with the radiator to protect the actuator. Ensure the pneumatic valve has a long life.
Angle principle and technical parameters of pneumatic valve:

single function of single and double action ( Pneumatic head is usually a hole) ； The working principle; According to spring return, reach the role of opening and closing, classified as type normally open and normally closed.
double role ( Pneumatic head is usually two holes) ； Working principle: to control the switch. （ According to customer's requirement, also can choose double-acting and spring return, control more accurate)

Angle of a pneumatic valve connection
pneumatic Angle seat valve in accordance with the piping installation categories can be divided into:
screwed connection link

fast loading type flange connection welding connection


Angle of a pneumatic valve type
the actuator
plastic pneumatic valve actuator Angle seat
stainless steel actuators Angle seat

pneumatic valve according to temperature at room temperature ( The most highly)
type high temperature ( The most highly)

Angle parameters of pneumatic valve application:
pressure range: - 。 Mpa（ The PN - PN）
medium temperature: - ℃~ +℃( The normal temperature type) - ℃, + ℃ ( High temperature type)
the environment temperature: - ℃ ~ + ℃
screw-type pneumatic Angle seat valve specifications: DN -
fast loading type pneumatic Angle seat valve specifications: DN -
flange specifications pneumatic Angle seat valve: DN - All stainless steel pneumatic thread (
Internal thread) Angle of pneumatic valve: DN -
all stainless steel pneumatic Angle of fast loading type pneumatic valve: DN -
all stainless steel pneumatic flange Angle seat valve: DN - Pneumatic valve body material: stainless steel
sealing materials: ptfe
actuator housing: poly acyl press, stainless steel,
pneumatic Angle seat valve in the application of life:
control gas: gas in the air:
control liquid milk industry automation industrial control fluid, food grade, water for life, the common pipe fluid medium, etc. With a pneumatic valve open or close position display. External pneumatic guide, can increase the service life and free maintenance. The overflow mouth and have since adjust between the slider gland, can improve the sealing performance. Pneumatic valve Angle structure, which can realize large flow ( Especially compared with the ordinary by the pneumatic valve) ,
compact structure response is fast. Pipes must be clean pollution-free. According to the need to install, but it is best to make the actuator. Pay attention to. Connection pneumatic valves on the pipeline, only on the user's special requirements, to remove the actuator. Open or repair the Angle of the pneumatic control valve before cutting fluid and gas source and reduce the pressure in the pipeline system. When choosing the direction of flow, can improve the service life of the product. When the working medium is liquid, select the flow can be waterproof impact hammer. Sizes for Φ/Φ/Φ products, work stress must be in. MPa below, otherwise must choose double
actuators.
size Φ/Φ products, actuators shall choose double-acting Φ size.
sizes for Φ products, actuators shall choose double-acting Φ size.
choose the characteristics of the flow direction is B:
when working medium for steam or gas, choosing the direction of flow, the flow of the product can be improved sealing can
, but due to the pneumatic valve body V seal contact for a long time working medium, and the service life of the product have a
effects, in addition, the work for the liquid medium is not waterproof impact hammer.

China pump pneumatic valve net 'Angle of pneumatic valve' supplier recommendation: