Related Products
The AC series Self-compensation shock absorber are designed with high hardness stainless steel shaft, the shock absorber has better impact and corrosion resistance, and it can work under adverse conditions. The compact structure leads to high max. absorbed energy, and the special oiling process leads to stable shock absorbing. The outer body of integrated structure is treated by QPQ, which has optimum corrosion and wear resistance and can withstand high pressure; it is easy to install and adjust for all threaded outer body which has good heat dissipation.
◈Body material: Iron
◈Stroke:25 mm
◈Working temperature:-10 ~+80 ℃
◈ Impact speed: Middle speed
Principle:
When piston rod is impacted, it will drive piston to press oil in inner
tube. Oil will be pressed out through orifice holes of inner tube. At
the same time, the oil returns to inner tube through returning hole of
inner tube.
After outside force vanishes, spring makes piston rod
immediately return to its position. Oil will return to inner tube
through check valve. Then shock absorber will return to be ready
position waiting for next action.
Feature
| Model | Stroke （mm） | Max. Impact Speed (m/s) |
| AC1410-2 | 10 | 2 |
| AC1420-2 | 20 | 2 |
| AC1425-2 | 25 | 2 |
| AC2020-2 | 20 | 2 |
| AC2030-2 | 30 | 2 |
| AC2050-2 | 50 | 2 |
| AC2525-2 | 25 | 2 |
| AC2550-2 | 50 | 2 |
| AC3660-2 | 60 | 2 |
Quality Standards
The company for the products are
brand new original products, no second-hand and refurbished products, or
leave a compensable ten and return the full amount, but the buyer due
to our purchase of model error is not responsible for returns, another
of the company's sales of products enjoy one year from the date of
shipment quality assurance, according to the original quality standards,
during warranty with product problems, need confirmation testing by the
manufacturer, the supplier to be solved, the demand side due to
storage, use, poor maintenance caused by lower-quality product, and not
raise objections.
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. We have a variety of ways to deliver goods, usually DHL, Fedex, TNL will be normal ways, If you require use of a courier, we can do it.
4. Also we can send by your delivery acount if you want.
After-sale service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
Airtac MAL Series Double Acting Type Pneumatic Cylinder Aluminum Alloy MAL Series Mini Air Cylinder
Our main products range include standaed and no-standard pneumatic cylinders,pneumatic valves, solenoid valves, , etc. With long time service expreience in industrial automation field, we shall be your right selection and helper on improving your productivity
Product Description
| Brand Name | Vilop |
| Model | MAL Series |
| Structure | Piston Cylinder |
| MOQ | 20 PC |
MAL Aluminum Alloy Round Body Mini Air Cylinders - MAL bore 16mm/20mm,25mm,32mm,40mm Round Mini Air Cylinder made of aluminum are ideal for small part positioning, clamping, and ejecting. They are the perfect choice for applications where small bore, medium duty.
Product Feature
MAL 16-25 Bore 16mm Pneumatic Cylinder
1. Manufactured by our enterprise.
2. Front and back cover and cylinder tube are connected by threads.
3. Piston adopts heterogeneous two-way seal structure. It has compact size and has the function of grease reservation.
4. Front cover adopts self-lubrication bearing guide that has good performance of lubrication and guide.
5. There are several modes of back cover, which makes the installation of cylinder more convenient.
6. There are cylinders and mounting accessories with several specifications for your choice.
Product Details
Freelubrication
Adapt the bearing with oil, lubrication is not required for the piston rod.
High viability
For main parts such as both end covers, cylinder tube with oxidtion treatment. This incresaes corrosion and impact resistance.
Heat resistance performance
With anti-heat material, the working temperature of the cylinder could be up to 150 ℃
Multi Installation Method
Multi installation accessories are available
| MAL Specification | ||||||
| Bore size(mm) | 16 | 20 | 25 | 32 | 40 | |
| Acting type | MSAL,MTAL | Single acting | ||||
| MAL MALD MALJ | Double acting | |||||
| Fluid | Air(to be filtered by 40µ m filter element) | |||||
| Operating pressure | Double acting | 0.1~1.0MPa(15~145psi)(1.0~10.0bar) | ||||
| Single acting | 0.2~1.0MPa(28~145psi)(2.0~10.0bar) | |||||
| Proof pressure | 1.5MPa(215psi)(15bar) | |||||
| Temperature ℃ | -20~70 | |||||
| Speed range mm/s | Double acting:30~800 single acting:50~800 | |||||
| Stroke tolerance | 0~150+1.0>150+1.4 | |||||
| Cushion type | Bumper | |||||
| Port size | 1/8” | 1/4” | ||||
| PT thread,NPT thread and G thread are available. | ||||||
Stroke
| Bore Size(mm) | *Standard Stroke(mm) | Allowable Strock |
| 10,16 | 25,50,75,100,125,150,175,200,250,300 | 800 |
| 20,25,32,40 | 25,50,75,100,125,150,175,200,250,300,350,400,500 | 1200 |
*For long strokes,it will be made-to-order
Auto switch:CS1-F,CSI-U
Ordering code
About Vilop
Guangzhou Vilop Pneumatic Co., Ltd. was established in 2008.based on a fast rate of growth,it is becoming a leading manufacturer of professional pneumatic cylinder in China.We mainly engaged in the research,development,manufacturing and exporter.our work is supply best quality pneumatic cylinder and best price to the customer and help them on their busuness.
SOLUTION
– At the beginning, we will have a communication with our customers on their demand, then our engineers will work out an optimum solution based on the customers’ demand and condition.
PRODUCTION
– Running in accordance with ISO 9001 quality system, the advanced production equipments, sophisticated processing technology, strict quality management system, skilled workers and innovative technical team, make our bearings in continuous quality improvement & technology development.
QUALITY CONTROL (Q/C)
- In accordance with ISO standards, we have professional Q/C staff, precision testing instruments and internal inspection system, the quality control is implemented in every process from material receiving to products packaging to ensure our bearings quality.
PACKAGE
– Standardized export packing and environment-protected packing material are used for our bearings, the custom boxes, labels, barcodes etc. can also be provided according to our customer’s request.
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the
goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer
the solve way for you.
More details,please visit our website: www.viloppneumatic.com/en/
Copyright © 2025 LV-pneumatic. | All Rights Reserved
