AIRWOLF rodless pneumatic air cylinders aluminium alloy gas transmission

       

Materials

◈ Rod nut: Carbon steel

◈ Piston rod: Carbon steel with 20 μm chrome plated

◈ Front cover packing: TPU

◈Bushing: Wear resistant material

◈Front cover: Aluminum alloy

◈Cushing O-ring: NBR

◈ Cushion gasket: PU

◈ Barrel: Aluminum alloy

◈ Piston: Aluminum alloy

◈Piston rod O-ring: NBR

◈Piston seal: NBR

◈Magnet: Plastic

◈ Wear ring: Wear resistant material

◈Bolt: Carbon steel

◈Back cover: Aluminum alloy

◈Tie-rod: Carbon steel

◈Tie-rod nut: Carbon steel

                           

part.1

Standard cylinder manufactured by our enterprise.

                           

part.2

The seal of piston adopts heterogeneous two way seal structure. lt's dimension is tight and it has the function of grease reservation.

                           

part.3

It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.

                           

part.4

Compared with ISO1 5552 standard cylinder, SC series cylinder with the same bore size is shorter.

                           

part.5

The buffer adjustment of cylinder is smooth and steady.

                           

part.6

Cylinders and mounting accessories with several specifications are optional.

                           

part.7

The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150.

◈ When load changes in the work, the cylinder with abundant output capacity shall be selected.

◈Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.

◈Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.

◈ Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.

◈The medium used by cylinder shall be filtered to 40μm or below.

◈Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.

◈ The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.

◈If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.

       

Packaging & Delivery

◈Packaging Details: Standard Carton box,and other special packing according to customer's requirement.

◈ Port: Ningbo/Shanghai

◈ Supply Ability: 1000 pieces per 12 working days

◈ Printing (Tension Control)

◈Semiconductor (spot welding machine, chip grinding)

◈Automation Control

◈ Robot

◈Opening and closing doors of automobiles, metros and CNC machine tools

◈Mobile Positioning of Manipulator Coordinates

◈ Bore size: 40 mm

◈Acting type: Double acting

◈ Fluid: Air

◈ Operating pressure: 0.15~1.0 MPa

◈Proof pressure: 1.5 MPa

◈ Temperature: -20~70℃

◈ Cushion type: Variable cushion