Worm gear box need what test was carried out on the performance

worm gear box need which tests on performance?
is worm gear box drive mechanism, internal is a worm and worm wheel structure, widely used in construction machinery industry. Worm gear box has the advantage of compact structure, stable working, low noise, can reverse self-locking. Worm gear box before put into use, it is necessary to test its performance. Worm gear box which performance tests need to be?

and meshing performance test to test the rotation of the overall requirements without resistance, flexibility, meshing clearance fit.
,
testing insulation resistance under the condition of room temperature and relative humidity less than %, the insulation resistance of the electric parts for resistance is greater than M Ω.
and no-load test
conditions of use: under the rated speed, the forward and reverse operation shall be not less than h;
test requirements:
) Smooth operation, no impact, no abnormal vibration and noise;
) No leak sealing and tapping;
) Without the phenomenon such as card tooth, the movement is not smooth;
) Transmission part is normal, fittings, fasteners, presence of loose;
) No abnormal noise, temperature does not rise too high, no leak phenomenon, such as test noise than the db.

, load performance tests of time: the oil temperature after balance h or above;
test requirements with no load test.

how to play the biggest benefit of the pneumatic valve worm gear box
worm gear box pneumatic valve open and close attention should be paid to operation direction should be clockwise closing, opening and closing operation of the mortise and tenon size should be standardized, face to the ground, make people can directly from the ground. Pneumatic valve gear box open close degree can be displayed through the dial needle, choosing dial needle qualitative material, if the condition good choice of stainless steel plate, and select the brush with paint steel plate, can not choose aluminum; To compelling and stability. Raise the use efficiency of pneumatic control valve and time.
how to perform the maximum efficiency of worm gear box, according to the pneumatic valve closing pressure, unbalanced force and the calculation method of pneumatic valves, pneumatic actuators structure size, in order to ensure there is enough power output. To determine the optimal flow rate at the same time, in order to seal. Worm gear box machinery pneumatic valve products in use should pay attention to how to correct safety operation, on the basis of improving the utilization efficiency of products, this is we all want to achieve in the use of any mechanical products in the best interests of.
more 'knowledge of pneumatic valves' please see China pump pneumatic valve net: http://s. zgbfw。 com/