Working principle of the stationary ceramic pneumatic valve valve industry _ pneumatic components factory

Pneumatic pneumatic valve pneumatic components factory production of stationary ceramic pneumatic valve, valve industry design in ceramic lined with pneumatic valve, has multiple functions such as cut/adjustment, can be in light corrosive medium containing abrasive solids throttling, cut off the control role. Stationary ceramic pneumatic valve features: (1) stationary ceramic pneumatic valve USES frames, fixed pneumatic design, achieve relatively high pressure difference, pneumatic always in the axial movement, not pressure difference and displacement effect, wear resistance, corrosion resistance, high temperature resistant and crush proof performance. (2) three panel design, symmetrical structure, fixed flow, before the valve seal, the sealing principle of automatic compensation, is not affected by wear seat after long-term use and regulation effect. (3) valve electric actuator and valve pneumatic actuator interface connection is through the stent, the IOS5211 size standards are met. (4) fixed porcelain pneumatic valve adopts pneumatic components factory valve industry stationary aerodynamic body structure, the valve stem turns only rotating torque, no tube differential pressure pneumatic and extrusion friction, low torque. (5) forging steel metal protection shell, or nylon coated by epoxy resin, meet the requirements of color recognition and corrosion environment. As well as stainless steel shell, allowing is exposed to extreme environment and is not subject to external corrosion degradation. It firmly around the ceramic components, prevent them from any possible damage. Pipeline pressure will not transfer to the ceramic but absorbed by the shell, because all flange bolts connected directly to the shell. 6 solid metal pneumatic valve body completely encapsulates, when with the seat with ACTS as a pressure vessel. This ensures that the stationary ceramic pressure tolerance of pneumatic valve and high pressure difference is used. All landowners fastening ceramic valve pneumatic corrosion and wear, supply the type O and all kinds of pneumatic V opening, ensure for quick opening, linear flow, parabolic linear and equal percentage adjusting application requirements. Was strong ceramic valve seat wear resistance, ceramic unique self lubrication, which has good surface sealing, being trapped not damaged performance, but also completely changed the stationary ceramic pneumatic valve leakage, torque, the sealing surface is not resistant to corrosion and wear faults. Pet-name ruby ceramic to ceramic seal. Ceramic valve of pneumatic and seat * * curve matching, seal joint effect, long-term to ensure that the VI leakage level closed or better regulation performance. Attending thick, strong ceramic. A reasonable and highly engineered control valve design. Strong, thick wall through the use of ceramic parts, stationary ceramic pneumatic valve can survive in continuous service time is far more than hard alloy or metal hard seal valve. ⑪ this stationary ceramic pneumatic valve and flange connection size requirements can be arbitrary, is not subject to replace the valve structure length, the effects of the flange standard delivery date. Stationary ceramic fixed valve pneumatic valve adopts pneumatic and rotary valve rod separation mode design, reduce the valve stem not bear radial pressure differential torque rotary valve pneumatic torque and pneumatic components factory is stationary ceramic pneumatic valve valve industry bright spots, make sure that the seat after long time scour by the medium wear also does not affect the switch and the regulating effect, prolong service life. Stationary ceramic pneumatic valve technical parameters: type: Q47Tc, Q347Tc, Q647Tc, Q947Tc nominal size: DN15 ~ 12 valve body material: WCB, A105, CF8, CF8M, CF3M, TA2, nominal pressure: PVC PN1. 0 ~ PN16MPa, 150 lb to 2500 lb, other nominal pressure can be in accordance with the request. Temperature: - 196℃~+100℃、- 25℃~+950℃、- 30℃~+160℃、- 30℃~+180℃、- 30 ℃ ~ + 310 ℃ pneumatic components factory specializing in the production of valve industry stationary ceramic pneumatic valve manufacturer, has the corrosion resistant. Resistant to wear and tear, sealed performance is good wait for an advantage, deeply the general customers trust and support. Customer according to fixed ceramic pneumatic valve body materials, working pressure, working temperature, nominal size and drive mode choice electric valve actuators or pneumatic valve actuator and relevant technical parameters, so that our sales staff for selection and quotation. : ceramic seal butterfly valve _ _ wear-resisting ceramics high temperature ceramic butterfly valve Q941TC electric ceramic pneumatic valve pneumatic valve installation and maintenance instructions