What should the non-standard cylinder type selection?

1. Selection of the step cylinder cylinder type selection should be based on job requirements and conditions, correct selection of the type of cylinder. In a single piston rod under the double-acting cylinder as an example to introduce the cylinder selection steps. ( 1) Cylinder bore. According to the size of the cylinder load to determine the output force of cylinder, thus calculate the cylinder bore. ( 2) Cylinder stroke. Cylinder stroke and the use of occasions and institutions related to schedule and but do not generally choose full schedule. ( 3) The strength and stability calculation of cylinder ( 4) The installation of the cylinder form. The installation of the cylinder form according to the installation location and the use of objective factors such as the decision. Under normal circumstances, the fixed cylinder. When need to work with agencies continuous rotary ( Such as the lathe, grinding machine, etc. ) , should choose the rotary cylinder. In the piston rod in addition to the linear motion, still need to make arc swing, choose shaft pin type cylinder. Have special requirements, should choose the corresponding special cylinder. ( 5) Cylinder cushion device. According to the speed of the piston to decide whether should use the buffer device. ( 6) Magnetic switch. When the pneumatic system adopts the electric control method, can be used with magnetic cylinder switch. ( 7) Other requirements. Such as cylinder work in harsh environments such as dust, need to install the dust cover on the piston rod out end. Requirements without dirt to choose when to oil or no oil lubrication cylinder.