What is a cylinder stroke?

Cylinder stroke is refers to the cylinder piston distance running back and forth. Cylinder is the main components of pneumatic transmission system, it can take the pressure of compressed air into mechanical energy. Below the cylinder stroke is associated with what? How to calculate? If picked the small cylinder diameter, the output power is not enough, the cylinder does not work; But the diameter is too large, the device not only heavy, high cost and the gas consumption increases at the same time, cause energy waste. MPa. Specific conditions to see all kinds of cylinder technology parameter table. Cylinder stroke and use occasions and institutions than the schedule and the installation of the different forms of the cylinder stroke than different. The piston rod biggest calculation length ( Ｌ) Can be detected by the empirical data table. In engineering design chosen by the size of the force out of the cylinder bore. Again, according to the actual schedule using occasions to check whether produce buckling strength of the piston rod. Example: a cylinder QGBQ x, its load of KGF calculated by the table found piston rod maximum length L =. Cylinder bore, the piston rod stem diameter, its load of KGF, calculated by the table found piston rod maximum length L =. Installed on the fixed structure form, the cylinder to allow travel to L = x =. Because the actual trip as < cylinder. So the cylinder does not produce buckling. According to the installation forms can be divided into stationary and oscillating cylinder, embedded, four kinds of rotary cylinder. Cylinder structure of main parts such as cylinder, cylinder head, piston and piston rod.