What are the import solenoid pneumatic valve connection way

the connecting way of pneumatic valve plate connection, pipe connection, the container type ( Pneumatic valve island, bus board connection and flange connection. Plate connection loading and unloading of convenient, don't need to remove the pipe repair, the complex of pneumatic system is very important. Pipe connection for more simple gas path system, based on the rapid joint or system. Flange connection is mainly used to bore diameter of pneumatic valve, such as pneumatic valve nominal diameter in mm or more.

plate connection solenoid pneumatic valve of the oil outlet are arranged on the same plane installation, and had connection screw hole, the pneumatic valve is called plate type pneumatic valve, such as electromagnetic reversing pneumatic valve for pneumatic valve plate (more SubplateMounting。 Board type pneumatic valve with screw fixation in the corresponding with the solenoid pneumatic valve oil mouth plate type or pneumatic valve block type connection. The advantage of this kind of connection mode is: convenient replacement component, does not affect the line, and possibly focuses pneumatic valve arrangement. Linked to plate pneumatic valve connecting two forms have connection and integration of boards.
tubular connection
solenoid pneumatic valve on the threaded connection pipe connection. Tube type pneumatic valve oil mouth with threaded pipe joints and pipe connection, and is fixed on the tube road. This kind of connection mode is suitable for small flow rate, small diameter solenoid pneumatic valve. Its advantage is: the connection method is simple, convenient layout, pneumatic valve in system oil be clear at a glance. The downside is: element dispersion, accounts for a bigger space of piping, joints is various, maintenance is not convenient to load and unload.
container type ( Pneumatic valve island, confluence link
container is on the basis of plate connection in a new way of connection. It makes the line greatly simplified, has smaller occupied space, easy installation, especially suitable for complicated pneumatic system.
container connections are multiple electromagnetic air valve or pneumatic pneumatic valve is installed on the connecting plate, connection plate to plate installed on the pneumatic valve has Shared air supply and exhaust road, or common and individual exhaust gas supply line.
from the assembly structure can be divided into integral type, module type, such as the concentration of by linear and less linear container plate structure. Container plate material for aluminum alloy, usually also have injection forming container plate with quick connector.
the integrated container plate its internal gas circuit structure is simple, small volume, compact structure, low cost, can not arbitrarily change the number of pneumatic valve installed on board. Outlet of A and B are usually located in the top of the container plate or side,
type module container plate is A set of modular container board, by connecting thread will container board, etc, it can be installed according to the number of pneumatic valve and circuit structure of the arbitrary assembly, complex pneumatic circuit.
concentration by linear set within the container plate plate has a connection with the plug-in type multicore terminals, electromagnetic pneumatic valve can be installed by the terminal connections with the outside. Electromagnetic pneumatic valve and the connection mode of container plate is linear and socket type two kinds, according to the need to choose. Its characteristic is wiring simple, clean and tidy appearance, convenient maintenance.
pick up less linear container plate in modern pneumatic automation systems, often using PLC programmable controller for program control of the system. For this purpose, the use of digital signal processing technology. The PLC parallel signal transformation into a series of signal transmission to the electromagnetic pneumatic valve, and only in - Wire can be controlled at the same time dozens or even hundreds of solenoid pneumatic valve. Within the container plate with a signal converter, the converter converts serial signal again to parallel signal, and according to the code sent to the specified address electromagnetic pneumatic valve action. Use this container board greatly reduces the complex wiring work, and improve the reliability of the system. Flange connection

it is through the pneumatic screw hole on the valve body ( Each oil mouth for a screw hole and the pipe end of flange, and screwed together. This pneumatic valve is called flange connection type pneumatic valve. Suitable for big size mm above the flow of large diameter pipeline system.