solenoid water control valve | Water solenoid valves

Product Information
Customer Reviews

Application Scope

pneumatic components's application range is specifically as follows.AIRWOLF insists on providing customers with one-stop and complete solution from the customer's perspective.

Company Advantages
1. For AIRWOLF Pneumatic, excellent design should be a perfect combination of appearance and performance.
2. solenoid water control valve also has an attractive appearance and the characteristics of normally open solenoid valve water .
3. normally open solenoid valve water works as the executive factor to improve the quality check process.

Detailed Description

It is a 1" Normal Close Water solenoid valve.Water solenoid valve has closed cavity, in a different location to open a hole, each hole leads to different tubing, cavity valve is among, both sides are two electromagnets, which face the magnet coil electricity body will be attracted to which side, by controlling the movement of the valve body blocked or leakage of different discharge of oil hole, and the oil hole is always open, hydraulic fluid will enter the different oil drain, and then through the oil pressure to push the cylinder piston, piston drives the piston rod, piston rod drive mechanism.Thus the mechanical motion is controlled by controlling the current of the electromagnet.

Features & Benefits

◈Model: 2W160-10 2W160-15 2W200-20 2W250-25 2W350-35 2W400-40 2W500-50 Joint Pipe Bore:G1/8;G1/4;G3/8;G1/2;G1;G2.

◈Operation Fluid Viscosity:20 CST (Below)

◈Working-pressure:0~2.0MPa

◈Max. Pressure Resistance:3.5MPa

◈Operating Temperature Range:-5~+80℃

◈Standard voltage:AC220,AC110V,AC24V,DC24V,DC12V.

◈Voltage Range:±10%

◈Material of Body:2W: Brass ; 2S: Stainless Steel

◈Material of Oil Seal:NBR, EPDMVITON / NBR, EPDM or VITON

◈Type:Normal Close Type ; Normal Open Type

◈Motion Pattern:Direct Drive Type

◈Working Medium: Air, Water, Oil, Gas,Fuel

Advantages

part.1

Direct-acting normally closed two solenoid valve, commutation quickly and sensitively

part.2

The structure is light and compact

part.3

Body material is stainless Steel

part.4

Suitable for a variety of working medium.

Application

◈ Water solenoid valve is suitable for water or liquid as the working medium, can automatically control or remote control of water, oil, liquid and other working medium pipeline on and off.Because this valve USES the rubber seal, therefore to the working medium cleanliness greatly reduces, has opens and closes quickly, the reliability high characteristic.

Characteristics

◈The diaphragm structure with direct motion is adopted to start without pressure, which expands its application field

◈The use of flat diaphragm structure opening and closing reliable, and enhance the service life of the product.

◈The use of laminated coils improves the safety of the product in a wide variety of environments.

Installation

◈Solenoid valve is generally directional, can not be installed in reverse, usually on the valve body with "→" to indicate the direction of medium flow, installation should be in accordance with the direction of"→ "instructions

◈Manual shut-off valve should be added before and after the solenoid valve, and a bypass should be set to facilitate the maintenance of solenoid valve in case of failure.

◈Take care not to use too much sealing material when taking over.

◈Try not to let the solenoid valve in the power state for a long time, It will reduce the coil life or even burn out the coil, that is to say, often open, often closed solenoid valve can not be used interchangeably.

Company Features
1. Being skilled at offering the most considerate service, AIRWOLF also has the ability to manufacture solenoid water control valve.
2. AIRWOLF CO, LTD is superior to other companies in water solenoid valves technology.
3. The essence in service creed of AIRWOLF CO, LTD is normally open solenoid valve water . Please contact. AIRWOLF CO, LTD persists in the normally closed solenoid water valve service theory. Please contact.

Favorable rate

100%

Buyer impression