Steam solenoid pneumatic valve installation method and maintenance matters needing attention

model a variety of electromagnetic pneumatic valve, pneumatic valve is mainly in the high temperature steam electromagnetic environment, the automatic control system can control according to the variation of temperature and pressure steam solenoid pneumatic valve opening and on and off. The heating equipment, industrial furnaces, chemical equipment, hvac equipment, shipbuilding and other industries, the steam solenoid pneumatic valve equipment most widely used.
we know that steam solenoid pneumatic valve can work under the environment of high temperature, the steam solenoid pneumatic valve has high protection performance. But even so, also need to master the correct method when installing, avoid improper operation caused harmful consequences. Giant good, pneumatic valve industry has served thousands of customers in a number of large industrial projects can be seen in the giant good steam solenoid pneumatic valve products. Here are based on huge steam solenoid pneumatic valve products, and attention about the installation.
first, when installing a steam solenoid pneumatic valve products, be sure to read the product installation manual carefully. Manual introduced the product model, specifications, using parameters such as purpose, working environment, for the installation of the product is very important.
second, before installing the solenoid pneumatic valve of steam pipe to clean with clear water clean first, avoid any blockage caused by the foreign body, easy to cause mechanical failure.
third, keep the good environment around steam solenoid pneumatic valve installation, avoid electromagnetic pneumatic valve installed in the water or water vapor condensation environment, this easy to increase the possibility of electromagnetic pneumatic valve failure, reduce the service life of pneumatic valve.
4, common steam solenoid pneumatic valve cannot be used in dangerous and explosive work environment, if the steam solenoid pneumatic valve requires explosion-proof performance, should be in advance to the factory.
the correct installation can maintain the normal operation of the equipment, prolong the service life of equipment, so in equipment maintenance phase, we should be how to correct operation again? These also are the pneumatic valve industry giant good share some small maintenance knowledge.
。 Regular cleaning steam solenoid pneumatic valve and bit off the dirt inside and outside, at the same time, be careful not to damage the sealing surface.
。 Steam solenoid pneumatic valve if long time need not, should be closed before the pneumatic valve pneumatic valve manually. To enable, pneumatic valve within the first ling, condensate water is clean and equipment commissioning, after equipment normal can be put into use.
。 When steam solenoid pneumatic valve need to unload to encapsulate storage, use compressed air to the pneumatic valve body parts and first clean the inside and outside, keep a clean and tidy state of storage, and stored in a clean, dry environment.
。 Use for a long time, such as between piston and pneumatic valve seat seal, piston sealing surface can be smooth again, again with the pneumatic valve seat grinding.
。 Finally, the steam solenoid pneumatic valve in the process of work, need to pay attention to the pneumatic valve and pressure gauge, keep the pneumatic valve used in the reasonable range of pressure.