Shandong cylinder characteristics and advantages

Due to the cylinder surface by steam erosion or corrosion of the trench, choose the appropriate electrode to the trench tian ping, with flat or flat feet to grind out trace, crapping to weld and combining with the surface in the same plane. Combined cylinder surface deformation or leakage is serious, the combination of the cylinder surface repair welding one or two - Mm wide dense eliminate gap sealing tape, high huaneng cylinder, and then measured with a ruler or buckle on the cylinder, and the red lead crapping, until eliminate the gap. This operation process is simple, preheating before welding cylinder to ℃, then at room temperature under subsection welding or skip welding. Choose austenitic electrode, such as A, A, with asbestos cloth covering insulation slow cooling after welding. After cooling at room temperature for grinding scraping. Compared well-known, custom-made non-standard cylinder, electric actuators, pneumatic cylinder can work reliably in harsh conditions, and the operation is simple, basic maintenance can be realized. Cylinder at making reciprocating linear motion, shandong cylinder for most industrial automation transmission requirements - — Artifacts of straight line handling. Regulation on either side of the one-way throttle valve installed in the cylinder can simply achieve steady speed control, shandong cylinder cylinder driving system has become the largest characteristic and advantage. So for no multipoint positioning requirement of users, the vast majority of from the point of use convenience more inclined to use the cylinder. The current industrial field use the application of the electric actuator is mostly high-precision positioning, more difficult to achieve this is due to using cylinder, the next best results.