Self-reliance type t regulate the application of the pneumatic valve

a. Application:

( ） Before products leave the factory has been in accordance with the requirements of the users and USES set temperature, the user after turning off the by-pass pipe, can be directly use this product.

（ ） Recommended for open order: first open the circulation pump, make whole heated water system is running, then open a little heat medium imported by the pneumatic valve, by raising the temperature of the heated water system gradually. For the temperature close to the set temperature, the pneumatic valve is opened entirely deadline.

（ ） Initial enabled, temperature fluctuations, can be used for a short-term operation, can achieve stable working condition. This product on the temperature of the signage for factory set temperature, we request for the user to adjust the reference, it does not represent the actual temperature and actual temperature to the scene of the thermometer readings shall prevail.

（ ） If there is any deviation in the use of temperature or the user needs to change the set temperature, can be adjusted. Will adjust wrench inserted into the regulation of temperature adjustment knob hole, from low to high temperature adjustment anticlockwise when adjustment wrench; By high temperature to low temperature adjustment, waiting for the sensor temperature cooled to less than the required to adjust the temperature, will adjust the wrench clockwise.

（ ） System to stop running, turn off heat medium imported by the pneumatic valve, then close system circulating pump.