SC standard cylinder maintenance youdao to eliminate failure

SC cylinder failure upkeep youdao SC standard cylinder common faults and its analysis, its main content is: ( ) Cylinder buffering effect is bad, this is mainly because sealing ring wear, or damage caused by the screw, the screw should be replace the sealing ring or mediation. ( ) Inside and outside leakage phenomenon in a cylinder, the main reasons are: piston rod installation eccentric or damage, lubricating oil supply, sealing ring seal is damaged, such as or cylinder contains impurities, etc. So at this time, we deal with the piston rod for inspection or restructuring, to ensure the alignment of the piston rod and cylinder, or replace the piston rod, sealing parts, etc. If the impurities, shall be removed in a timely manner. ( ) SC cylinder output force is insufficient or action is not smooth, the main reason is the piston and piston rod stuck, poor lubrication, gas supply shortage, it is also possible because cylinder with condensed water or impurities, then we should check whether oil mist detector work reliable, cylinder gas supply pipe was clear. If cylinder contains impurities or condensed water, should keep clear of in time or rule out clean. Zhengzhou zhongyuan flywolf pneumatic provides you with the latest industry information, for you to solve technical problems, create first-class pneumatic components, build first-class service experience, be model industry, everything is under fly pneumatic Wolf.