Ordinary flush pneumatic valve collocation technique

pneumatic valve, fast water, can be closed at any time under artificial control of water pneumatic valve, can be applied to the toilet water tank, it is with the aid of pneumatic valve core of gravity, or with the help of elastic force down quickly flush pneumatic valve. Because of its fast closing function, ensures that the water in the tank is not an empty, so as to achieve water-saving effect. Can be used to make almost no fresh water water-saving toilet.

and two delay flushing pneumatic valve, the utility model provides a two delay flushing pneumatic valve, mainly by the pneumatic valve, buttons, pneumatic valve stem, delay components, such as composition, its characteristics is based on the existing technology, pneumatic valve body in the end diameter of operation or button to set up two physical limit unit, and can make the button around the pneumatic valve stem has a certain amount of deflection function, the length of the trip through the control button to control the size of the flush, let users can freely adjusting water according to the actual need, can not only meet the health requirements, but also save a lot of water resources, in accordance with the current environmental protection trend, and the economic savings, wide application scope.

, can hide the flush pneumatic valve inside the wall, the utility model discloses a can hide the flush pneumatic valve inside the wall, aims to provide a kind of embedded inside the wall, do not take up space, convenient maintenance flush pneumatic valve; The utility model adopts the technical scheme is that a kind of can hide the flush pneumatic valve inside the wall, including pneumatic valve and pneumatic with inlet and outlet valve core assembly, pneumatic valve core assembly coat has a gland, pneumatic valve core assembly with gland are available from the open end of pneumatic valve mounting holes are loaded and removed, and through the gland of male with pneumatic valve mounting holes female with fixed in mounting holes, described in the gland with the thread mating surface of the pneumatic valve mounting holes with sealing ring, pneumatic valve mounting holes open end out of pneumatic valve body wall slab installed a annular mud wall, described the open end of pneumatic valve mounting holes with a decorative cover; The utility model is widely used in various forms of flush pneumatic valve.

and light touch button type flush pneumatic valve, pneumatic valve, a light touch button type flush water channel, the water channel, wire, pneumatic valve rubber gasket, pneumatic valve, pneumatic valve cover, buttons, return spring and end cover, the water channel of the inlet and the water channel of the outlet of the lateral pneumatic valves equipped with rubber pads, and fixed by the pneumatic valve cover and seal, in the pneumatic valve rubber pad and pneumatic valve cap formation pressure chamber is connected to the steel wire of the pneumatic valve plug, whose character is: close to the outer edge of the rubber gasket to strengthen land of pneumatic valve, strengthen the center hole and side hole on a chip through the pneumatic valve rubber gasket, into water channels, water and pneumatic valve plug wire connection and buttons, and through the central hole on strengthening piece, is set in the inside of the buttons have return spring, key by the end cover is fixed and the seal in the water channel and water channel control convex strength. The utility model has simple structure, easy to use, and energy saving.