The DMF-Z type electromagnetic pulse valve is a right-angled valve with an angle of 90 degrees between the entrances and exits, which is suitable for the installation of the air pack and the dust blowout tube. The air flow is smooth and can provide ash removal pulse that meets the requirements.
Ordering Code: 8296400.8171
Material
◈Body: Aluminum
◈ Seat Seal: TPE
◈Spring: 304 SS
◈ Screws: 302 or 304 SS
◈ Port size: 1.5"
◈ Switching function: normally closed
◈ Operating pressure: 0.4 to 8 bar
◈ Fluid temperature: -40 °C up to max. +85 °C
◈ Ambient temperature: -20 °C up to max. +85 °C
◈Plastic bags, boxes, cartons, and pallets. Meantime, we can pack the goods according to customers' special requirements.
Model | DMF-Z-20 | DMF-Z-25 | DMF--Z-40S | DMF-Z-50S | DMF-Z-62S | DMF-Z-76S | |||||
Working Medium | Gas | ||||||||||
Type | Normal Close Type | ||||||||||
Electric current | 1A,0.46A,0.23A | ||||||||||
voltage Range | DC24V,AC110V,AC220V | ||||||||||
Joint Pipe Bore | G 3/4″ | G 1″ | G 1-1/2″ | G 2″ | G 2-1/2″ | G 3″ | |||||
Working-pressure | 0.2~0.6MPa | ||||||||||
Max. Pressure Resistance | 0.8MPa | ||||||||||
Operating Temperature Range 1 | -25 ~ +80 ℃, -13℉ ~ 176 ℉ | ||||||||||
Operating Temperature Range 2 | -25 ~ +230 ℃, -13℉ ~ 446 ℉ | ||||||||||
Voltage Range | ±10% | ||||||||||
Material of Body | Aluminum alloy | ||||||||||
Relative humidity of air | ≤85% | ||||||||||
Protection Level | IP65 | ||||||||||
Diaphragm life | Five years |
◈ One year quality guarantee Policy We will check the goods quality before shipment. If there are some unexpected problems happen, we hope to solve the problems with buyer through friendly in the following ways:
◈ If it is quality problem, buyer can submit argue within 15days after receiving the goods,buyer must provide photos or video and other evidence to seller for identify.
◈ Man-made damaged, buyers take full responsibility.
Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
Copyright © 2025 LV-pneumatic. | All Rights Reserved