Instructions on the use of the thin cylinder

Thin cylinder using the working medium: in addition to water filter and dry clean air containing oil mist. Medium and temperature, specially in addition to water treatment. Thin cylinder cylinder storage warehouse should be put in ventilated dry, prevent rust of be affected with damp be affected with damp. Before installation should be under the condition of no-load trial, rear can normal installation. According to the conditions of use select installation form, when installation should pay attention to: A: earrings, intermediate shaft pin installation, the force should be in the same plane. B: flange installation, its force and bearing point in one axis, flange and supporting seat connection flange surface should be brought under force, and don't make the fixed nail gong under tension. C: the cylinder piston rod not allowed under partial load or horizontal load. Super-long stroke cylinder, should add support or guide. The cylinder is to clear the pipe before access to the pipeline. Prevent sundry dust from entering the cylinder cavity. If necessary can adjust the buffer line, in order to adjust the buffering effect to avoid collision piston and cylinder head, attaint parts. In use process should be regularly check tight to prevent the phenomenon of string. Cylinder size of inlet and exhaust pipe joint generally corresponding to the cylinder bore, users according to usage, one-way throttle valve in into the vent pipe installation, to adjust the cylinder piston rod.